Drone Gimbal Camera

  • FD501 Infrared laser ranging, positioning and tracking drone gimbal camera
FD501 Infrared laser ranging, positioning and tracking drone gimbal camera

FD501 Infrared laser ranging, positioning and tracking drone gimbal camera

  • Product description: FlyDragon FD501 thermal imaging module has a resolution of 640*512. The temperature measurement function includes real-time monitoring and display of the center point, maximum temperature, minimum tem
  • INQUIRY

Infrared laser ranging, positioning and tracking drone gimbal

FlyDragon FDGD502 thermal imaging module has a resolution of 640*512. The temperature measurement function includes real-time monitoring and display of the center point, maximum temperature, minimum temperature and average temperature of the video screen. The target positioning function is to intelligently calculate the longitude and latitude coordinates of the center point of the video screen or military Gaussian. Rectangular coordinates (6 degree band), the tracking function is an external (quickeyes) video tracker.
Specifications:

Weight:1050g

Control signal :S.BUS, Serial port

Size:145*182*217mm

Working Voltage:16.8(6s)

working temperature: -10℃-55℃

Protection level: IP43

Sensor:  CMOS:1/2.8″; total pixel: 230w pixel
Lens: 35 times optical zoom lens
Control angle range:   Pan 360° ,Pitch:-120°-30°

Angle jitter range:±0.03°
Resolution rate:   30fps(1920*1080)
Range of pointing zoom:  35 times optical, 4 times digit
Thermal imaging
Detector category:  uncooled infrared microbolometer

Element spacing:12um
Resolution rate:  640*512
Sensitivity: ≤50mk@25℃ F#1.0
Frame frequency: 50Hz

LRF Range:≤1500m

Precision: 1m

The FD501 optoelectronic pod is precision machined from aviation aluminum alloy and high-strength nylon. It has high strength, good vibration absorption, rain resistance, dust resistance, and corrosion resistance. The refined circuit system can work stably under low temperature conditions of -10°C. , Can adapt to the harsh field working environment.


FD501 uses a three-axis stabilization gimbal to keep the camera stable during intense movement. The pan-tilt and the aircraft work closely together, and the high-speed processor controls the precise operation of the motor to compensate for every subtle movement, so that the camera maintains a stable shooting angle, and can shoot clear and stable pictures even in high-speed flight and severe vibration.
FD501 integrates IRay’s new generation 35mm focal length, 12μm high-quality thermal imaging module, and military 1600m 905nm laser beam wavelength high-quality laser ranging module, and has undergone strict optical axis parallel alignment to ensure laser ranging targets It is always located at the center point of the visual acquisition screen, and transmits the angle motion data and target distance information of the three-axis pan/tilt through the serial interface.


FD501 has a target positioning module. Through the GCS APP software, it can intelligently calculate and display the longitude and latitude coordinates, military Gauss rectangular coordinates and elevation information of the target. The target coordinate data can also be sent through UDP or TCP protocol, and at the same time, it can be displayed on the high-resolution satellite map. It displays the position information of the aircraft, the target and the operator in the middle, and supports the visual acquisition picture and the satellite map picture-in-picture display. In the long-distance reconnaissance, precise determination of the coordinates of the control points, correction of artillery firing, and visibility of the battlefield overview.