Baby shark vtol drone for mapping

Baby shark vtol drone features a highly advanced aerodynamic design. It is made of composite material, which features high strength and very light weight. Baby shark vtol drone adopts quick-detach design which makes the plane easy to set up and transport. The fuselage also has big inner space to hold flight controller, batteries or other equipments.
Baby sgark can take off and land vertically in a small area. The frame of baby shark is only 2.68kg, and max take-off weight is 12kg, the stall speed of the baby shark is 15m/s-16m/s, the highest speed is about 100km/h. In this baby shark plane we suggest to use two 6S 5000mah lipo batteries for lifting motors, and 30000-40000mah Li-ion battery for cruising motor and propeller, so except the battery, motors, ESCs, propellers and other necessary equipments still has 1.5kg payload left for zoom or mapping cameras. BABY SHARK can perform most tasks like long range inspection, survey and mapping etc.

Specifications:

KIT frame material: carbon fiber Composites
Wingspan: 2.5m
Frame Weight: 2.68kg
Fuselage:Composites
Total Weight: 5.5kg(without battery)
Max Take-off Weight: 12kg
Max Payload: 6.5kg(including battery)
Max Flight Time: 2.5 hours
Max Speed: 100km/h
Recommended Set-up:
Autopilot: V5 plus  1
T-motor MN505 KV260 4
T-motor FLAME 60A ESC 4
1655 MARKII Matte Carbon Fiber Propeller CW&CCW 4
T-motor AT4120 KV500 1
Hobbywing 120A ESC 1
15×8 Wooden Propeller CW 1
X10 Mini Servo 4
ASSAN UBEC-8A 1