In the age of the SLT a vectored thrust market entry from Foxtech. Only one motor becomes a passenger when in forward flight. Also much less in the way of a framework for the quad motor setup normally seen in an SLT.
I think this one will be popular, the buzz is already buzzing. It’s hard to know when to jump in with new mapping drone airframes, designs change every six months it seems.
Well done again to Philip Rowse and Michael Oborne the Cube and Mission Planner with Ardupilot firmware are the default choice.
Nimbus VTOL is a modified version of original Nimbus 1800mm FPV plane. By adding additional tail motor and digital tilting servos, the modified version, Nimbus VTOL is becoming a Tri-copter VTOL with vector Yaw.
Nimbus VTOL features quick assembly and disassembly modular design. It is extremely convenient to disassemble and carry. The wing and the head cover are connected by double hooks, so it is very convenient to use. The carbon tube has been extended to three-quarters of the wing, which can provide a great wing strength. And the battery compartment is big enough to hold one 6S 10000mAh lipo battery, and the max flight time is up to 50 minutes.
-Take off and land vertically like a multicopter.
-Great Wind Resistant Feature
-Go waypoints & click-go automatically in either fixed wing or multicopter mode.
-No launching rail or parachute needed, launching directly from an area as small as 4x4m
-Do mapping jobs by designing in ground station.
-In case there is any failure on ailerons, elevators, Nimbus VTOL mapping version can switch to multicotper mode to save the plane.
Contact: Fly Dragon Drone Tech.
Email: export at dronefromchina.com
Add: NO. 9 Dayu Road PiDu distric, ChengDu 611730, China